The road to a simple DIY Pedal, pt 4

A very (as in very) hot battery tells me there’s a short somewhere. Troubleshooting with the multimeter is under way…

The road to a simple DIY Pedal, pt 3

After a quick restock trip I have now soldered all the parts together.

IMG_4922

I made the mistake of attaching the input / output jacks before realising I had missed the foot switch. This was easily fixed though.

IMG_4925

One thing I found difficult was to determine the length of the connector cables to the jacks, dc source and the switch. This time I made them longer than necessary just to make it a bit easier to mount the components…

Next up is to drill the enclosure.

IMG_4926

Also, I can’t decide if I should add a status LED or not….

The road to a simple DIY Pedal, pt 2

After pouring over several potential veroboard layouts I’ve decided to go for a simple Bazz Fuss as my first project.

A quick search reveals endless variations and tweaks, but for this first version my plan is to build one of the very simplest, as seen below:

2078940970

With the goal set I started out tonight by cutting down the board to the necessary size. I used a regular knife to trace out where the cuts should go, then simply snapped the board to the right dimensions.

IMG_4897

If you think it looks bigger than the layout above that’s because I added 3 additional rows for drilling holes for the spacers that will secure the board in the pedal case.

Here’s another couple of shots with most of the components soldered in. I’m one capacitor short so I decided to stop here for tonight.

IMG_4908

IMG_4909.JPG

How do you learn?

In 2011 I bought an electric guitar.

In fact, my original plan was to learn the acoustic and to that end I had bought a Hello Kitty branded black guitar on an impulse while living in Tokyo.

kitty

After realising I didn’t have time to practice, it ended up (like I suspect so many other) standing in a corner collecting dust.

That is, until my wife decided to pick it up. She quickly learned the basics and watching her get better and better I decided it was time to give it another go.

At this time we were living in San Francisco, and I thought rather than buying another acoustic, I would get an electric to complement. A late evening trip to Guitar Center at Van Ness and our home was one Ibanez richer.

I_RG471_natural_flat

However, soon after buying the electric and learning just a few basic chords, I slipped via Midi into the world of synthesizers, and since then have spent the better part of the past 3 years exploring electronic music instead.

This all changed as part of our recent move, when I decided to downsize my musical equipment and get back to basics again. Now I’m struggling for the 3rd time to actually learn how to play the guitar properly.

This said, I do not regret all the time I spent learning software and synthesis as I also picked up some basic music theory along the way, and I can see how this helps in getting a better grasp of the guitar as an instrument as well.

I’m actually really excited to start this next chapter of Glitzerstrahl and I look forward to sharing the road with you all…

Please share in the comments if you have any tips for how to learn the guitar (especially the electric) faster :).

strat

My current (middle)

Building or Buying?

Let’s just get it out of the way, building your own pedals will probably never be cheaper than just buying them.

That is, unless you plan on building a lot of pedals. Economies of scale will likely never work in your favour, but if you stick with the hobby for a while I suspect you start to build up a supply of various components and tools, to the point where you can experiment with new builds with almost no additional investment.

Then it might just start to make economic sense…

Then again, I guess very few builders are into this stuff for pure economic reasons. I know I’m not. I do this (or I want to do this) simply because its fun. And educational.

My goal is to get to a level where I can experiment with effects that I dream up myself. I already have several ideas that I’ve been carrying around since I got into modular synthesis.

Hopefully this time around I’ll actually realise at least some of them!